Fuji Xerox DocuPrint C4350 User Manual page 247

Staple jam in staple cartridge for saddle stitch
If a staple jams in the staple cartridge for saddle stitch, take the action as
described in the procedure below.
Procedure
1
Make sure that the printer has stopped,
and then open the finisher front cover.
2
Pull out the unit while pushing levers
(R2) and (R3) rightward.
3
Hold the levers on the left and right
sides of the staple cartridge for saddle
stitch, and remove the cartridge by pull-
ing it upward.
6.3 Stapler Faults
R3
R2
(1)
(2)
6
217