Table of Contents
Advertisement
Error code
007-954
[Cause] The paper size loaded in the bypass tray is different from that
[Action]
012-241
[Cause] Failure occurs in the finisher.
[Action]
012-242
012-244
012-252
012-253
012-254
[Cause] The paper ejected to the finisher was taken out before the finisher
[Action]
012-255
[Cause] Failure occurs in the finisher.
[Action]
012-256
[Cause] Failure occurs in the finisher.
[Action]
012-257
012-260
012-262
012-267
012-281
016-503
[Cause] SMTP server name is not set correctly.
[Action]
Cause/action
specified on the print driver.
Start printing after specifying the correct paper size on the print
driver.
Switch the printer off and on. If the problem still persists, contact
our Customer Support Center.
tray comes fully down, causing contact with the sensor. Or there
is a foreign object under the finisher tray.
Switch off the printer, and switch it on again after removing any
foreign object under the finisher tray. If the problem still persists,
contact our Customer Support Center.
Switch the printer off and on. If the problem still persists, contact
our Customer Support Center.
Switch the printer off and on. If the problem still persists, contact
our Customer Support Center.
Check if the SMTP server is set up correctly with CentreWare
Internet Services. Also, check the settings for the DNS server.
"4.13.1 Setting up the Environment for E-mail Printing"(P.90)
6.5 List of Messages
239
6
Advertisement
Table of Contents
Troubleshooting
