Table of Contents
Advertisement
6.5 List of Messages
Message
Jam - Open G. Open 4b to
Left
Open G.
Push 4 in.
Open G Pull out4Turn 4a to
Left
Remove All PaperInside 4
"Open G. Add
R1
Open G. Check Staples in
R2,R3
6
Open G. Add
R2,R3
OpenG.Pull outR4Empty
Punch Cont
226
[Cause]
[Action]
[Cause]
[Action]
[Cause]
[Action]
Staples to
[Cause]
[Action]
[Cause]
[Action]
Staples to
[Cause]
[Action]
[Cause]
[Action]
Cause/action
A paper jam has occurred inside the finisher.
Open the finisher front cover (G), open [4b] leftward and
remove the jammed paper.
"6.2.8 Paper Jams in the Finisher" (P.201)
Unit [4] of the finisher is not fully inserted.
Open the finisher front cover (G), and push in unit [4].
A paper jam has occurred inside the finisher.
The messages are displayed alternately.
Open the finisher front cover (G), draw out unit [4], turn [4c]
counter-clockwise to wholly remove the jammed paper
inside unit [4].
"6.2.8 Paper Jams in the Finisher" (P.201)
No staple remains in the staple cartridge (R*) of the finisher.
Replace with a new staple cartridge.
"5.5.5 Replacing the Staple Cartridge" (P.146)
"5.5.6 Replacing the Staple Cartridge for Saddle Stitch" (P.148)
Staple cartridges (R2) and (R3) for pamphlets on the fin-
isher are not set correctly.
Open the finisher front cover (G), and set the staple car-
tridges for pamphlets on the finisher correctly.
"3.1 Main Components and Their Functions" (P.30)
"5.5.6 Replacing the Staple Cartridge for Saddle Stitch" (P.148)
No staple remains in the staple cartridge (R2) or (R3) for
pamphlets on the finisher.
Replace with a new staple cartridge.
"5.5.6 Replacing the Staple Cartridge for Saddle Stitch" (P.148)
The punch dust box (R4) of the finisher is about to be filled
with punch dust.
Open the finisher front cover (G), and empty the punch dust
box.
"5.5.7 Disposing Chips from Punch Dust Box" (P.150)
Advertisement
Table of Contents
Troubleshooting
