Table of Contents
Advertisement
2.2 Print Driver Installation
2.2.1
When Printing on the Network (TCP/IP
Environment (LPR/LPD))
This section describes the procedure for installing the print driver to print directly
from the computer via the printer on the TCP/IP network.
If your OS is Windows 95/Windows 98/Windows Me, Fuji Xerox's TCP/IP Direct Print Utility is
●
installed together with the print driver.
If your OS is Windows NT 4.0/Windows 2000/Windows XP/Windows Server 2003, the LPR port
●
supported by the OS is used.
2
Before Installation
If the TCP/IP protocol is not installed in your computer, an error message about
the "TCP/IP protocol" may be displayed during installation of the print driver.
Before installing the printer, check for the following:
■Windows 95/Windows 98/Windows Me
When the LPD port is used for printing, the computer uses Fuji Xerox's "TCP/IP
Direct Print Utility (TCP/IP Protocol)". TCP/IP Direct Print Utility is installed
together with the print driver using the driver installation tool. Before installing
TCP/IP Direct Print Utility, check that the "TCP/IP protocol" has been installed in
the computer.
■Windows NT 4.0
When printing with the LPD port, check that the "TCP/IP protocol" and "Microsoft
TCP/IP Print" are installed in the computer.
If it is not installed, install it with reference to the instructions supplied with Win-
dows NT 4.0.
■Windows 2000/Windows XP/Windows Server 2003
When printing with the LPD port, check that an "Internet protocol (TCP/IP)" is
installed in the computer.
If it is not installed, install it with reference to the instructions supplied with Win-
dows 2000/Windows XP/Windows Server 2003.
26
Advertisement
Table of Contents
Troubleshooting
