Table of Contents
Advertisement
5.9 Adjusting Gradation
5
To check the adjustment result, refer to "Printing Chart" (P.171) and print the cor-
responding chart.
Check that Low, Middle, and High density dot marks on the chart of C, M, Y, or
K, are close to those of the color samples. If you are not satisfied with the result,
do the adjustment again.
The <Process Gray> is gray obtained from a combination of C, M, and Y. If
adjustment is correctly performed, this gray will become gray similar to black. If
you feel that any color of C, M, or Y in Process Gray is stronger than others,
adjust target color again.
179
Advertisement
Table of Contents
Troubleshooting
