Fuji Xerox DocuPrint C4350 User Manual page 19

The machine has a circuit breaker. In the event of a current leakage, the breaker
will automatically cut off the power circuit to prevent any leakages or fire from occur-
ring. The breaker is normally On ("|"). Once a month, check the breaker for correct
operation. Also, make sure that it is earthed. If not, the breaker cannot detect the
current leakage which can cause electric shock. Check the breaker by using the fol-
lowing procedure. If you notice any unusual condition, contact our Customer Sup-
port Center.
(1)Turn the printer off.
(2)Push the circuit breaker RESET button all the way in. The Reset button is held
pushed in if you take your finger off this button.
(2)Lightly push the TEST button with a ball-point pen, etc. The RESET button is
popped up.
This completes the check of the breaker.
(3)Again, push the RESET button all the way in.
Be sure to switch off and unplug the machine before accessing the interior of the
machine for cleaning, maintenance, or fault clearance. Access to a live machine's
interior can cause electric shock.
Switch off the machine before connecting the interface cable or options. Connect-
ing the cable or card with a live machine can cause electric shock.
● The machine has a built-in circuit for protection against lightning-induced surge cur-
rent. If lightning strikes in your neighborhood, switch off the machine. Disconnect
the power cord from the machine, and reconnect them only when the lightning has
stopped.
Power switch
Reset button
Test button
Others
xvii