Printing On Non-Standard Size/Long-Size Paper; Loading Non-Standard Size Paper - Fuji Xerox DocuPrint C4350 User Manual

4.5
Printing on Non-Standard
Size/Long-size Paper
This section describes how to print on non-standard size paper such as long-size paper.
This printer supports the following paper sizes:
Paper
feed
direction
Long edge (horizontal):
210 to 431.8 mm
Non-standard size paper cannot be loaded in the optional tray 3 (large capacity) and optional tray 4 (large
●
capacity).
Long-size paper cannot be output to the finisher (optional) and face up tray (optional).
●
4.5.1

Loading Non-standard Size Paper

This section describes how to load non-standard size paper.
For tray 5 (Bypass)
The following procedure is an example for loading long-size paper in tray 5
(Bypass).
To load non-standard size paper other than long-size paper, refer to "5.4.4 Loading Paper into
●
Tray 5 (Bypass)" (P.126).
Attaching the Banner Tray (optional) to tray 5 (Bypass) allows you to load up to ten sheets of paper
●
with a long edge of up to 1200 mm. For more details, refer to the manual supplied with the Banner
Tray.
When printing on long-size paper, [High Resolution] cannot be selected in [Print Mode].
●
When printing on long-size paper, only [Heavyweight 1] can be selected in [Paper Type for Bypass
●
Tray].
For trays 1-4
Short edge
(vertical):
148 to 297 mm
For tray 5 (Bypass)
Short edge
(vertical):
100 to 305.0 mm
Long edge (horizontal): 100 to 431.8 mm
Long paper size (431.9 to 1200 mm)
Paper
feed
direction
4
55