Table of Contents
Advertisement
6.5 List of Messages
Message
RemovePaper fromTop Tray
of G
Open G. Open 2a.Clear jam
Empty G top tray
Empty G bottom tray
RemovePaper fromCenter
Tray of
Obstructed.CheckBelow Tray
G
6
Ém Close Front
Close Cover of 5on right of G
Open5 right of GClear
jam.Close5
224
[Cause]
A paper jam has occurred inside the finisher.
*These messages are displayed alternately.
[Action]
Open the finisher front cover, open [2a], and remove the
jammed paper.
"6.2.8 Paper Jams in the Finisher" (P.201)
[Cause]
The output tray is filled up.
[Action]
Remove the paper on the output tray.
"3.1 Main Components and Their Functions" (P.30)
[Cause]
The booklet tray is filled up.
[Action]
Remove the paper on the booklet tray.
"3.1 Main Components and Their Functions" (P.30)
[Cause]
The finisher tray is filled up.
[Cause]
Remove the paper on the finisher tray.
"3.1 Main Components and Their Functions" (P.30)
[Cause]
An obstacle exists under the finisher tray.
[Action]
Remove the paper on the finisher tray first, and remove the
obstacle for resetting from the error.
"3.1 Main Components and Their Functions" (P.30)"
Cover at G
[Cause]
The finisher front cover (G) is open.
[Action]
Close the finisher front cover (G).
"3.1 Main Components and Their Functions" (P.30)
[Cause]
The ejecting port cover (5) on the right side of the finisher is
open.
[Action]
Close the ejecting port cover (5) on the right side of the fin-
isher.
"3.1 Main Components and Their Functions" (P.30)
[Cause]
A paper jam has occurred near the finisher tray.
[Action]
Open ejecting port cover (5) on the right side of the finisher,
and remove the jammed paper.
"6.2.8 Paper Jams in the Finisher" (P.201)
Cause/action
Advertisement
Table of Contents
Troubleshooting
