Table of Contents
Advertisement
6.5 List of Messages
Message
Please wait...
Close Cover F
Close Cover L4
PaperJam-Open L*Lift Green
Lever
PaperJam-Open L*Remove
Paper
6
Paper Jam
Pull out Tray *
Please wait...
xxxx
All data
Cancelling...
All data
Ejecting...Tray*
228
[Status]
The system status of this printer is being diagnosed/initial-
●
ized. This message appears during power on or system
resetting. After a while it will change to [Ready to print].
Displayed during the warm-up before ejecting the print
●
data that remains in the printer.
Print data cannot be received from the computer.
[Cause]
Cover F (cover on top of finisher interface) is open.
[Action]
Close cover F.
"3.1 Main Components and Their Functions" (P.30)
[Cause]
Cover L* is open.
[Action]
Close cover L*.
"3.1 Main Components and Their Functions" (P.30)
[Cause]
A paper jam has occurred at cover L*.
[Action]
Check the cover position indicated on the display with the
status display, and remove the jammed paper.
"6.2 Clearing Paper Jams" (P.188)
[Cause]
A paper jam has occurred at cover L*.
[Action]
Check the cover position indicated on the display with the
status display, and remove the jammed paper.
"6.2 Clearing Paper Jams" (P.188)
[Cause]
A paper jam has occurred at paper tray *.
[Action]
Remove the jammed paper from tray *.
"6.2 Clearing Paper Jams" (P.188)
[Status]
The printer is being warmed up before ejecting the print data
that remains in the printer.
Print data can be received from the computer.
[Status]
The print data that remains in this printer is being discarded.
Print data cannot be received from the computer.
[Status]
The print data that remains in this printer is being ejected.
Print data cannot be received from the computer.
Cause/action
Advertisement
Table of Contents
Troubleshooting
