Automatic Tray Selection - Fuji Xerox DocuPrint C4350 User Manual

5.4.7

Automatic Tray Selection

If you set paper source on the [Paper/Output] tab to [Paper Source] in the PCL6
print driver's properties screen when making prints, the printer automatically
selects the corresponding paper tray according to the size and orientation of the
document to print. This is called "Automatic Tray Selection".
If the printer judges that there are two or more corresponding trays in automatic
tray selection, the printer gives higher priority to the tray having the highest
[Paper Type Priority] set at [Tray Paper Type]. During automatic tray selection,
trays whose [Paper Type Priority] setting is set to [Off] are not targeted in [Auto-
matic Tray Selection]. Also, if the [Paper Priority] setting is exactly the same,
automatic tray selection is determined by [Tray Priority].
If automatic tray selection cannot identify the appropriate tray, a message prompting replenish-
●
ment of paper appears. However, it is possible to modify the settings, so that the paper size close to
the original document, or one size bigger than the original document will be automatically selected
without displayingi this mdssage.
When the printer runs out of paper during printing, select the tray containing the paper of the same
●
size and orientation that was being used for printing, and continue printing (Auto Tray Switch fea-
ture). During this operation, a tray containing paper of type whose [Paper Priority] setting is set to
[Off] cannot be switched to.
For information about setting [Paper Type], [Paper Type Priority], [Paper Tray Priority], and setting
the paper substitute feature, refer to "Printer Settings" (P.278). Some of these settings can also be
made from CentreWare Internet Services.
For example:
Setting
Setting Paper Priority
Document
Plain First
Recycled First
Bond Off
Custom-1 Off
Custom-2 Off
Custom-3 Second
Custom-4 Off
Custom-5 Off
Setting
Setting Tray Paper Type
Recycled
Tray 1 Recycled
Bond
Tray 2 Bond
Plain
Tray 3 Plain
Plain
Tray 4 Custom-3
Setting
Setting Tray Priority
Tray 1 First
Tray 2 Second
Tray 3 Third
Tray 4 Fourth
First
Second
Plain
Third
Fourth
5.4 Loading Paper
Determined to:
Recycled
5
133