Fuji Xerox DocuPrint C4350 User Manual page 295

■TBCP Filter
Set the TBCP filter to enable or disable, while data from the PostScript is being processed. The
default is [Disable].
EtherTalk
Set when using EtherTalk.
■Port Startup
Set the status of EtherTalk port to enable or disable when the power is switched on. The default is
[Disable]. Set [Enable] when you use EtherTalk.
If memory becomes insufficient when the port is set to [Enable], the status of the port may be automatically set
to [Disable]. Set the status of the unused port to [Disable] or change memory allocation capacity at [Allocate
Memory], in case of insufficient memory.
■PJL (LOOK 2) (P.287)
You can use the PJL command with this printer regardless of any print languages used. The PJL
command controls the print job, and is necessary when you use the print driver. Set the status of the
PJL command sent from the computer to enable or disable. By using the PJL command, you can
select any print language for the next data, even if the printer is processing different print language.
Set [Enable] for normal use. The default is [Enable].
USB-1 (1.1)
Set to use the USB 1.1 port.
■Port Startup
Set the status of the USB port to enable or disable when the power is switched on. The default is
[Disable]. Set [Enable] when you use the USB port.
Set the status of the unused port to [Disable] or change memory allocation capacity at [Allocate Memory], in
case of insufficient memory.
■Print Mode (LOOK 1) (P.287)
Set the process method (targeted print language) of the print data.
The optional values are as follows:
[Auto] (default)
Automatically detects which print language is used in data received from the computer, and prints
accordingly with data.
[PS] [ESC/P] [HP-GL/2] [PCL] [TIFF]
Data received from the computer is processed.
7.2 Description of Common Menu
7
265