Table of Contents
Advertisement
Staple jam in staple cartridge
Procedure
1
Make sure that the printer has stopped,
and then open the finisher front cover.
2
Hold the staple cartridge holder by its
lever [R1], and draw out the staple car-
tridge holder to the right (towards you).
3
Remove the staple cartridge holder by
holding its orange lever.
The staple cartridge is attached firmly. Strongly pull
when removing the staple cartridge
.
4
After removing the staple cartridge,
check the inside of the finisher for any
remaining staples.
6.3 Stapler Faults
6
215
Advertisement
Table of Contents
Troubleshooting
