Loading Paper Into Tray 5 (Bypass) - Fuji Xerox DocuPrint C4350 User Manual

5.4 Loading Paper
7
Push the tray in gently until it comes to
a stop.
8
After changing the paper size, set the paper type for the paper tray
(plain, bond, recycled paper, etc.).
For information about how to set the paper type, refer to "(2) Set the paper type." (P.123).
5.4.4

Loading Paper into Tray 5 (Bypass)

When printing on postcards, envelops, or non-standard size paper that cannot
be loaded in Trays 1 to 4, use Tray 5 (Bypass). The following describes how to
load paper into Tray 5 (Bypass).
Detailed print instructions are designated using the [Paper/Output] tab in the
5
print driver. At that time, also specify the type of paper to load. The paper types
that can be specified are as listed below.
Plain paper (64 to 98 g/m
●
Bond paper (64 to 98 g/m
●
Recycled paper (64 to 98 g/m
●
Heavyweight paper 1, Heavyweight paper 1/Side 2 (99 to 169 g/m
●
Heavyweight paper 2, Heavyweight paper 2/Side 2 (170 to 220 g/m
●
Transparency
●
Lightweight paper (55 to 63 g/m
●
Lavels (99 to 169 g/m
●
Custom paper 1 to 5
●
Coated paper 1, Coated paper 1/Side 2 (99 to 169 g/m
●
Coated paper 2, Coated paper 2/Side 2 (170 to 220 g/m
●
Positions on sides 1 and 2 may deviate when printing on name-card paper.
For information about printing on special paper, refer to "4.3 Printing on Special Paper" (P.49),
and/or "4.5 Printing on Non-Standard Size/Long-size Paper" (P.55).
126
2
)
2
)
2
)
2
)
2
)
2
)
2
)
2
)
2
)