Printing Is Slow - Fuji Xerox DocuPrint C4350 User Manual

Want to check whether a print job was output.
Using the Document Monitor from the CD-ROM, you can check the processing
status of a print job on your computer. In addition, the CentreWare Internet Ser-
vices allows you to delete a print job from your computer.
For details about the CentreWare Internet Services, refer to "5.1 Configuring the Printer from the
●
Computer (CentreWare Internet Services)" (P.96).
For the Document Monitor, refer to the manual on the CD-ROM supplied with this printer.
●
Want to check the number of prints.
You can check the number of prints on the operation panel. You may also print a
printer output summary report to check the number of prints from each computer
(job owner).
For checking the number of prints, refer to "5.7 Checking Total Number of Printed Pages" (P.162).

Printing is slow.

If data is not output for a long time (about 5 minutes) after a print instruction, try
the following methods. They may make printing faster.
Select [Set Details] on the [Set Print] dialog box (properties screen) of the
●
printer and set [Page Print Mode] to ON. (This is effective for a complicated file
containing many images and characters.)
Select [Set Details] on the [Set Print] dialog box (properties screen) of the
●
printer and change [Image Compression] to an optimum method.
Select [Set Details] on the [Set Print] dialog box (properties screen) of the
●
printer and set [Print Driver Resolution] low.
For setting print mode, refer to "4.9 Setting Print Modes" (P.73).
●
For details about page printing mode, image compression, and print driver resolution, refer to the
●
Online Help of the printer.
H Q&A
333