Fuji Xerox DocuPrint C4350 User Manual page 202

5.9 Adjusting Gradation
To print the gradation adjustment chart for Resolution Preferred, select [Text] in step (6) of the flow-
chart.
How to get the setting value
Get the value in [Lighter/Darker] by comparing the printed gradation adjustment
chart and "Color sample for gradation adjustment" supplied with the printer.
Find the density that is close to density of the color sample from 7 offset patches
and their intermediates of the gradation adjustment chart. You can select the
value from 13 levels in the range from -6 to +6.
Also, refer to the steps described on the gradation adjustment color sample.
The default values are all 0.
Procedure
1
Fold the printed gradation adjustment chart along the vertical guide
(dotted line) for the desired color, as shown in the diagram.
5
2
Adjust the part of the chart with desired density to the part of the color
sample with the same position.
For adjustment of low density (L), adjust Low to Low.
172
Cyan Magenta Yellow Black
C M Y K
Fold Fold Fold
CL ML YL
Margin Margin Margin
Process Gray
KL
Margin