Fuji Xerox DocuPrint C4350 User Manual page 271

Error code
016-705
[Cause] Secure Print document cannot be registered because no internal
[Action]
016-706
[Cause] The number of Secure/Sample Print users exceeds the upper limit.
[Action]
016-707
[Cause] Sample print document cannot be printed because no internal hard
[Action]
016-709
[Cause] An error occurred during PCL processing.
[Action]
016-710
[Cause] Delayed Print document cannot be registered because no inter-
[Action]
016-711
[Cause] PCL6 print data cannot be processed because of the necessary
[Action]
016-716
[Cause] TIFF file cannot be spooled due to insufficient internal hard disk
[Action]
016-719
[Cause] PCL print data cannot be processed, because memory is insuffi-
[Action]
016-720
[Cause] Detected an unsupported PCL command.
[Action]
Cause/action
hard disk (optional) is installed.
To use the Secure Print feature, you need to install the internal
hard disk (optional).
"4.7 Printing Confidential Documents/Printing after Checking the
Printout (Secure/Sample Print)" (P.65)
Delete unnecessary documents/registered secure print users that
are saved in the printer, and try to print again.
disk (optional) is installed.
To use the Sample Print feature, you need to install internal hard
disk (optional).
Try to print again.
nal hard disk (optional) is installed.
To use the Delayed Print feature, you need to install the internal
hard disk (optional).
memory is insufficient.
If the [Print Mode] is [Super Fine], change the setting to [High
Quality] and retry. If the problem is still not corrected, retry after
changing the setting to [Standard].
"4.9 Setting Print Modes" (P.73)
capacity.
Install internal hard disk (optional) or delete unnecessary data on
the internal hard disk to free up space.
cient.
Install additional memory to increase memory space.
If printing fails still after memory addition, change the print driver set-
ting.
Check the print data.
6.5 List of Messages
241
6