Table of Contents
Advertisement
7.2 Description of Common Menu
Printer Settings
The menu for setting the auto tray switch and the paper tray.
For details about automatic tray selection, refer to "5.4.7 Automatic Tray Selection" (P.133).
Substitute Tray
Set whether to print using substitute paper when the tray selected by the auto paper switch runs out of
paper. When using this function, select the paper size. The optional values are as follows:
[Off] (default)
The message to load paper is displayed, instead of using substitute paper.
[Larger Size]
It is switched to print with equal magnification as the original document(s) on the second largest
sized paper from the selected paper size.
[Nearest Size]
Printing on the closest matching paper size as the selected paper size. Images may automatically be
reduced if necessary.
[Bypass Feed]
Printing on the paper loaded in the Tray 5 (Bypass).
The instruction from the computer takes precedence, if any is specified from the computer.
Priority is given to an instruction from the computer if any.
Paper Type Error
Set whether to display a confirmation screen or use a different type of paper without confirmation if
no tray has a type of paper specified for the print job. The optional values are as follows:
[Confirm Screen] (default)
Displays a confirmation screen for canceling the job or to using a different type of paper.
[Print]
Uses the currently loaded paper for printing.
7
278
Advertisement
Table of Contents
Troubleshooting
