Fuji Xerox DocuPrint C4350 User Manual page 277

Error code
116-738
[Cause] The size and orientation of specified PCL form do not match the
[Action]
116-739
[Cause] The form or log cannot be registered, as the PCL form memory or
[Action]
116-740
[Cause] An arithmetic error occurred, as value exceeding the limit of the
[Action]
116-741
[Cause] The form cannot be registered, as the upper limit of PCL form
[Action]
116-742
[Cause] The logo data cannot be registered, as the upper limit of PCL log
[Action]
116-745
[Cause] An PCL command error occurred.
[Action]
116-746
[Cause] The specified PCL form is not registered yet.
[Action]
116-747
[Cause] The paper margin is too great against the HP-GL or HP-GL/2
[Action]
116-748
[Cause] No drawing data exists in the HP-GL or HP-GL/2 print data.
[Action]
116-780
[Cause] A problem exists to the attached document received by the
[Action]
Cause/action
print paper.
Correct the size and orientation of print paper according to the
specified PCL form.
hard disc capacity is insufficient.
Delete unnecessary data or increase the PCL form memory
capacity.
printer is used to the print data.
Check the print data.
registration has been reached.
Delete unnecessary forms.
data registration has been reached.
Delete unnecessary logo data.
Check the print data.
Use an already registered form or newly register the form. The
form registration status can be checked using [PCL, ESC/P user
definition list].
effective coordinate area.
Decrease the paper margin value and then retry.
Check the print data.
printer.
Check the attached document.
"4.13.2 Sending E-mails"(P.92)
6.5 List of Messages
247
6