Fuji Xerox DocuPrint C4350 User Manual page 310

7.2 Description of Common Menu
Paper Size
Set the paper size to load into the paper tray.
For information about suitable paper sizes, refer to "A Main Specifications" (P.298).
■Trays 1 to 4
[Auto] (default)
Select when loading paper of standard size.
[Non-Std]
Select [Non-Std] when printing with non-standard paper size, and specify its long edge and short
edge. Specify the edges in mm or inch whichever selected at System Settings [mm/inch]. The setting
range depends on the unit.
mm: Short edge from 148 to 29 7 mm x Long edge from 210 to 432 mm (PostScript: 140 to 432
mm)
Inch: Short edge from 5.8 to 11.7 inches x Long edge from 8.3 to 17.0 inches
[Tray 2] to [Tray 4] are available when the optional trays are mounted.
Paper Image Qty
You can set image quality according to the paper type: [Plain], [Recycled], [Bond], [Side 2 Paper],
[Heavyweight 1], [Heavyweight 1 S2], [Heavyweight 2], [Heavyweight 2 S2], or [Custom 1] to
[Custom 5]. [User 1] to [User 5] are used to set different image qualities when plain paper is loaded
on more than one tray. Names specified at [Paper Name] are displayed for [User 1] to [User 5].
Set image quality for each type of paper. The optional values are as follows:
■[Plain], [Recycled], [Plain], [Recycled], [Bond], [Side 2 Paper], Custom 1] to [Custom 5]
A: (Default of [Bond])
B: (Default of [Plain] and [Side 2 Paper])
C:
D: Select this for bad paper* subject to quality irregularities during printing.
7
E:
F:
G: Image quality of [F] with a small number of lines. Select this if quality irregularities are con-
S:
*Bad paper means that you see irregularities clearly in surface transparency when you hold it against
the sun.
280
2
Suitable for J paper (82g/m
Suitable for general office paper (P paper, C2, paper, and other).
(Default of [Recycled])
Suitable for recycled paper (C2 paper, WR100 paper, and other).
Image quality of [D] with a small number of lines. Select this if quality irregularities are con-
spicuous even in prints by [D]. However, this image quality is available only when [Print Mode]
is set to [Bond] in the properties of the print driver and when [Print Mode] is [Normal], [Quality
Adjustment Mode] is [Recommended], and [Recommended Quality Type] is [Photo] or [Pre-
sentation] at printing.
Select this for bad paper* weighing 90 g/m
spicuous even in prints by [F]. However, this image quality is available only when [Print Mode]
is set to [Bond] in the properties of the print driver and when [Print Mode] is [Normal], [Quality
Adjustment Mode] is [Recommended], and [Recommended Quality Type] is [Photo] or [Pre-
sentation] at printing.
Suitable for paper, plain but heavyweight.
) and other bond paper dedicated to color prints.
2
and subject to quality irregularities during printing.