Fuji Xerox DocuPrint C4350 User Manual page 152

5.4 Loading Paper
Paper type settings procedure
(1) Check if the paper loaded in the tray requires setting.
(2) Set the paper type and size, as needed.
(1) Check if the paper loaded in a tray requires setting.
Find which paper is loaded in the tray from the lists of recommended paper type
in "5.4.1 Paper Types" (P.114). Next, check if the setting is required using the
table below, and make settings, as needed.
Paper type loaded in tray
Plain
Bond
Recycled
Lightweight (55-63g/m
Heavyweight (99 - 169g/m
Transparency
5
Lavel
Custom 1-5
Optimum printing may not be obtained merely by the paper type setting. In such a case, change the
image processing value on the control panel.
For information about the image quality, refer to "Paper Image Qty" (P.280). For information about
the procedure, refer to "5.4.5 Setting for Using Rough Surface Plain Paper" (P.130) and "5.4.6 Set-
ting for Using Special Heavyweight Paper" (P.132).
122
Setting item
Unnecessary
Necessary
(2) Set paper type and size.
Necessary
(2) Set paper type and size.
Necessary
2
)
(2) Set paper type and size.
Necessary
2
)
(2) Set paper type and size.
Necessary
(2) Set paper type and size.
Necessary
(2) Set paper type and size.
Necessary
5.4.5 Setting for Using Rough Surface Plain Paper (P.130)
Setting requirement