Loading Paper Into Trays 1 To 4 - Fuji Xerox DocuPrint C4350 User Manual

5.4 Loading Paper
■Storing and Handling Paper
Please Keep the Following Points in Mind When Storing Paper
Store paper inside a cabinet or other dry place. Paper that has absorbed mois-
●
ture can cause paper jams and image quality defects.
After opening a package of paper, wrap up the remaining paper to store it. It is
●
recommended that you include moisture prevention packets.
Paper should be stored flat, to prevent bends or warping.
●
Please Adhere to the Following When Setting Paper into the Tray
Align the stack of paper neatly before setting it in the tray.
●
Do not use paper that is folded, creased, or heavily warped.
●
Do not use waved or curled paper.
●
Do not load paper of mixed size together into the tray.
●
Transparency paper and label paper can cause paper jams, and multiple
●
sheets can be fed to the printer at once. Be sure to carefully fan these types of
paper.
When continuously outputting onto transparencies, transparency sheets some-
●
times will stick to each other. Remove transparencies from the output tray
every 20 or so sheets, and fan them to cool them down.
5
5.4.2

Loading Paper into Trays 1 to 4

Loading Paper into Trays 1 to 4

The following describes how to load paper into Trays 1 to 4. When a paper tray
runs out of paper during printing, a message will appear on the control panel.
Load paper according to the message. Printing will be automatically resumed
when paper is added.
For information about changing the paper size and orientation, refer to "5.4.3 Changing the Size of
Paper in Trays 1 to 4" (P.124).
120