Setting Addresses - Fuji Xerox DocuPrint C4350 User Manual

Printing the Settings List
Procedure
1
Print the "System Settings List" with reference to "5.6 Printing Report/
List (P.152)".
2
In the "System Settings List", check the addresses of [TCP/IP: IP
Address], [TCP/IP: Subnet Mask], [TCP/IP: Gateway Address] and
[WINS: Primary WINS Server Address], [WINS: Secondary WINS
Server Address] under [Communication Settings]. For how to check the
"System Settings List", refer to "Checking the Settings List" below.
Checking the Settings List
■When neither TCP/IP nor WINS address is obtained
Your network has neither a DHCP server nor a WINS server. Refer to "1.3.2
Setting Addresses" (P.11) to set the IP address.
■When the address is obtained for TCP/IP but not for WINS
Your network has no WINS server. Do not use the DHCP environment
because printing may be disabled when the IP address assigned to this printer
is changed. Refer to "1.3.2 Setting Addresses" (P.11) to set the IP address of
this printer manually.
■When both TCP/IP and WINS addresses are obtained.
Your network has the DHCP and WINS servers operating. It is recommended
to use the DHCP environment. The IP address of this printer will be set by the
DHCP server. The name (FXxxxxxx) displayed to the right of [Host Name]
under [SMB] in the "System Settings List" is registered in the WINS server.
1.3.2

Setting Addresses

This section describes the procedure for setting the IP address on the control
panel.
Depending on the network environment used, you may need to set subnet mask
and gateway address. Consult your network administrator for the items to be set.
The message displayed at the beginning of IP address setting may be other than
[Ready to Print]. If [Get IP Add. Fail] is displayed first, press the <Menu> button
to perform the procedure from the beginning.
1.3 Setting the IP Address
1
11