Fuji Xerox DocuPrint C4350 User Manual page 20

For Machine Operation
Do not place any liquid container such as a vase or a coffee cup on the machine.
Spilt water can cause a fire or electric shock
Do not place any metal parts such as staples or clips on the machine. If metal and
flammable parts get into the machine, they can short-circuit internal components,
and cause fire or electric shock.
If debris (metal or liquid) gets into the machine, switch off and unplug the machine.
Contact our Customer Support Center. Operating a debris-contaminated machine
can cause fire or electric shock.
Never open or remove machine covers that are secured with screws unless specifi-
cally instructed in the "User Guide." A high voltage component can cause electric
shock.
Do not try to alter the machine configuration, or modify any parts. An unauthorized
modification can cause smoke or fire.
This equipment is certified as a Class 1 laser product under [IEC825 (1984)]. This
means that the machine does not emit hazardous laser radiation. Since radiation
emitted inside the machine is completely confined within the protective housings
and external covers, the laser beam cannot escape from the machine during any
phase of user operation. Do not perform any operation apart from the instructions
given in the manual. There may be a danger of laser beam leakage.
Never load the CD-ROM on any type of audio player. Loading the CD-ROM on an
audio player can causes a terrific noise and it may give damages to your ears or to
your speakers.
Do not place a magnet near the safety switch of the machine. A magnet can acti-
vate the machine accidentally, resulting in injuries.
Do not use a highly flammable spray or solvent near the machine. It can cause fire.
xviii