Printable Area; A.3 Printable Area - Fuji Xerox DocuPrint C4350 User Manual

A Main Specifications
A.3

Printable Area

Standard printing area
The standard printable area is the size after a 4.1 mm margin is deducted each
from the top, bottom, right, and left of paper. (For SRA3 (320 mm wide), 8.5 mm
is deducted from the right and left.) The actual printing area may differ depending
on the printer (plotter) control language.
■
Paper width: Below 12 inches
Non-printable area 4.1mm
Guaranteed
printing area
4.1mm
4.1mm
Extended Printing Area
If the printing area is extended, data can be printed in an area up to 302 x 1194
mm. The non-printable area differs depending on the output size as follows:
To extend the printing area, change the setting of [Margin/Print Position] on the [Basic] tab of the
print driver or [Printable Area] on the operation panel.
■
Paper width: Below 12 inches
Non-printable area
4mm
Guaranteed
printing area
2mm
2mm
306
■
Paper width: 12 inches
Non-printable area
Guaranteed
printing area
4.1mm 4.1mm
■
Paper width: 12 inches
Non-printable area
Guaranteed
printing area
0.9mm
2mm
■
Paper width: 12.6 inches
(SRA3 (320 mm wide))
Non-printable area
4.1mm
4.1mm 8.5mm
4.1mm
■
Paper width: 12.6 inches
(SRA3 (320 mm wide))
Non-printable area
4mm
8.5mm
0.9mm
2mm
4.1mm

Printable area

8.5mm
4.1mm
4mm
Printable area
8.5mm
2mm