Nec Expressbuilder; Nec Expressbuilder For Dos-Based With Local Console - NEC Express5800 series User Manual

6-4 Installing and Using Utilities

NEC EXPRESSBUILDER for DOS-Based with Local Console

This subsection describes the procedures for using DOS-based NEC EXPRESSBUILDERwith local
console.
Starting NEC EXPRESSBUILDER
The following procedure instructs you to start NEC EXPRESSBUILDER.
IMPORTANT: Do not remove the NEC EXPRESSBUILDER
CD-ROM while NEC EXPRESSBUILDER is running.
1.
Turn on the peripheral devices and the server in this order.
2.
Insert the NEC EXPRESSBUILDER CD-ROM supplied with your server into the
CD-ROM drive connected to your CPU blade.
3.
Ensure that the floppy disk drive connected to your CPU blade is empty.
4.
Press the RESET switch or press Ctrl, Alt, and Delete to reboot the CPU blade. (You
may also turn off and then on again to reboot the CPU blade.)
NEC EXPRESSBUILDER boots up displaying the top menu.