NEC Express5800 series User Manual page 92

4-26 Configuring Your Server
Load Setup Defaults
Select this item to return all the values of SETUP to the default values
Select "Yes" to return the values to the default values. Select "No" to return to the Exit menu screen.
IMPORTANT:
different from their default values depending on the model of the server.
It is necessary to set the values meeting the environment in which the
server is used referring to the models.
Load Custom Defaults
If you select this menu and press Enter, the saved custom default values are loaded.
Save Custom Defaults
If you select this menu and press Enter, the parameters set currently are saved as the custom default
values. After the storage, the Load Custom Defaults menu appears.
Discard Changes
Select this item to return the values just modified to the previous values before saving the values to
CMOS. Selecting "Discard Changes" causes the screen shown below to appear.
Select "Yes" to discard the newly selected information and return to the previous values.
Save Changes
Select this item to save the newly selected information to CMOS (non-volatile memory) without the
termination of SETUP. Selecting "Save Changes" allows the screen shown below to appear.
Select "Yes" to save the newly selected information to CMOS (non-volatile memory)
The values of SETUP at the shipment may be