NEC Express5800 series User Manual page 194

8-22 Troubleshooting
14.
If requested, select one of the procedure below:
[Manual Recovery] (Press M)
Do not select this option unless you are a high-level user or a system administrator. If
you use this option, you can recover the problems of system files, partition boot
sector, and start-up environment.
[Quick Recovery] (Press F)
This option is very easy to use and the user does not need to do anything during the
procedure. If you select this option, the system recovery disk program starts to
recover the problems concerning system files, partition boot sector of system disk,
and start-up environment (if multiple operating systems are installed on the system).
15.
Follow the on-screen instructions, and then press L when prompted to insert the system
recovery disk. The system will be restarted once.
NOTE:
16.
Repeat steps 1 to 12.
The recovery procedure will be started.
During the recovery, the missing files and the damaged files are replaced either by the
files in C:\ I386 folder of hard disk drive or the files in systemroot\ Repair of the system
partition. These replaced files do not reflect the changes of the configuration after the
setup at all.
17.
Follow the on-screen instructions.
Note any file name in which trouble is detected during the procedure, it is useful to
diagnose how the system has been damaged.
18.
Terminates the procedure if the recovery is successful.
If the computer restarts normally, it means that the correct files have been copied.
Starts the procedure without system recovery disk.