3-14 Setting Up Your Server
To connect the power cord of the Blade Assembly Unit to the uninterruptible power unit system
(UPS), insert the cord to the service outlet on the rear face of the UPS. Refer to the manual shipped
with the UPS for the position of the outlet on the UPS.
When the power cord of the Blade Assembly Unit is connected to the UPS, change the BIOS
settings of the CPU blade in order to make the Blade Assembly Unit link with the power supply
from the UPS.
BIOS can be set by the parameters appearing when "AC-LINK" or "DC-LINK" on the BIOS
"System Hardware" menu is selected. See Chapter 4 for details.