NEC Express5800 series User Manual page 136

5-26 Installing the Operating System
Graphics Accelerator
The drivers for the mounted standard graphics cards will be installed automatically.
The procedure below applies only when it is necessary to install manually.
In Windows 2000, when you delete and re-install a graphics accelerator driver after installation of
the OS, please re-install in the following procedures.
NOTE: In Windows Server 2003, re-installation is unnecessary.
1.
Insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive.
2.
Click the Start menu, point to [Programs], [Accessories] and click [Windows Explorer].
3.
Run "Setup.exe" in the following directory.
<CD-ROM Drive Letter>:\WINNT\W2K\VIDEO\ATI\setup.exe.
4.
Follow the message to continue the installation.
If the dialog message "Digital Signature could not been found." appears, select [Yes] to
continue.
5.
Remove the NEC EXPRESSBUILDER CD-ROM from the CD-ROM drive, follow the
direction on the screen and restart the system.
CD-ROM Driver
For External CD-ROM N8460-001, the driver must be installed after the installation of Windows
2000 or Windows Server 2003. Refer to the user's guide of external CD-ROM N8460-001 for the
detailed procedure.