DOS-based NEC EXPRESSBUILDER with Remote Console
This subsection describes the procedures for using DOS-based NEC EXPRESSBUILDERwith
remote console.
NEC EXPRESSBUILDER contains the remote console feature that allows the system administrator
to set up the server from the management workstation (management PC) via the network or the
server's COM B (serial) port.
IMPORTANT:
Do not use this feature on any other computer than the server, or
on any other server obtained without the NEC
EXPRESSBUILDER. Doing so may cause a failure of the server.
When a keyboard is connected to the server, the remote console
feature is disabled. The NEC EXPRESSBUILDER determines that
the server has a console. (Nothing is displayed on the management
PC.)
Installing and Using Utilities 6-7