NEC Express5800 series User Manual page 144

5-34 Installing the Operating System
6.
Click [Performance Options].
7.
Click [Change] on the [Virtual Memory] dialog box.
8.
Modify [Initial Size] in the [Paging File Size for Selected Drive] box to the value larger
than [Recommended] value, and click [Set].
IMPORTANT:
Be sure to create the memory dump with the size described above
on the OS partition. If [Initial Size] of the paging file is specified
to the value smaller than "Recommended" value, the correct debug
information (memory dump) will not be collected.
For more information on the "Recommended" value, see "Partition
Size to be Created" described earlier.
We recommend you test once the memory dump by pressing the
dump switch, and make sure that the dump is collected normally.
In case the memory is expanded, re-specify the paging file to suit
the new memory size.
9.
Click [OK].
If prompted to, restart the system.