4-34 Configuring Your Server
Creating RAID 0 array
To create a RAID 0 array, follow the procedure below:
1.
Select RAID-0 on the Select RAID Type window and press Enter.
2.
Select the hard disk drive to be used and press Enter.
3.
Select the stripe size you desire and press Enter.
You can select any of 16K, 32K, and 64K. If the selected drive has partitions, the message
notifying the deletion of the partitions appears. Select [Yes] to continue the operation or
[No] to cancel it.
4.
Enter the name of the RAID drive with alphanumeric characters of up to 15 characters and
press Enter.