NEC Express5800 series User Manual page 171

7.
Follow the Guide line showed in the bottom of the screen and press ESC to show the End
user Menu showed below.
<Test Result>
<Device List> Shows the information of all the devices connected.
<Log Info>
<Option>
<Reboot>
8.
Select <Reboot> in the Enduser Menu above.
The CPU blade restarts, and NEC EXPRESSBUILDER boots the system.
9.
Exit the NEC EXPRESSBUILDER, and remove the CD-ROM from the CD-ROM drive.
10.
Power off the CPU blade.
11.
Reconnect all the LAN cables removed in Step 2.
This completes the System Diagnostics.
Shows the screen of the diagnosis completed aforementioned.
Shows the log information and error messages of the diagnosis. It can be
saved to a floppy disk. To save the log information to a floppy disk, insert
a formatted floppy disk to a floppy disk drive and select <Save>.
Change where to output log.
Restarts the CPU blade.
Maintenance 7-5