NEC Express5800 series User Manual page 101

5.
Check the information appearing on the screen, select [Yes] and press Enter.
6.
If a message "Create Array? " appears, select [Yes] and press Enter to create the RAID 0
array.
After the array is created, the display automatically returns to the Main menu.
IMPORTANT:
In the RAID 0 array configuration, the hard disk drive access lamps
can operate only after OS is booted.
In a RAID 0 system, the following log may be registered in the
event log due to delay of I/O during high-load operation. However,
this indicates the retry processing by HostRAID operating normally
with no influences on application and system operations.
Source:
Event ID:
Description: Device \Device\SCSI\a320raid1 did not make any
a320raid
9
response within the timeout period.
Configuring Your Server 4-35