Terminal Service Client - NEC Express5800 series User Manual

5-18 Installing the Operating System

Terminal Service Client

The Terminal Service Client can be run on Microsoft Windows 95, Microsoft Windows 98,
Microsoft Windows Millennium Edition (Me), Microsoft Windows XP, Microsoft Windows NT
3.5x/4.0, Microsoft Windows 2000, Windows Server 2003, and 32-bit Windows including several
server versions.
The terminal service client is connected to the share created above. The share name is
"\\server-name\TSClient". As \\server-name, specify the name of the computer on which the
terminal service is installed. The several names do not distinguish uppercase letters from the
corresponding lowercase letters.
Installation for Windows Server 2003
1.
Connect the terminal service client to "\\server-name\TSClient share" created above.
IMPORTANT:
You cannot connect to the server if the administrator password is
not set. Set the password for security measures.
The functions except AFT and ALB are not supported.
2.
Double-click on "Setup.exe".
3.
When the installation wizard appears, click on [Next].
4.
If the License Agreement appears, click on
[I accept the terms in the licenses agreement].
5.
Enter the [User Name] and the [Organization] in the [Customer Information] box.
6.
Click on [Next].
7.
Click on [Install] in the [Ready to Install the program] dialog box to end the process.