NEC Express5800 series User Manual page 76

4-10 Configuring Your Server
Advanced
Move the cursor onto "Advanced" to display the Advanced menu.
The above Advanced menu screen contains no options for setup. Display the respective submenu for
each option for setup. Select an option with the " " mark and press Enter to display its submenu.
See the table below for the items.
Option
Boot-time
Diagnostic Screen
Reset
Configuration Data
NumLock
Memory/Processor
Error
Parameter Description
[Disabled] Specify whether to display the Power On
Self-Test (POST) screen at start-up.
Enabled
If this item is set to "Disabled," the "NEC"
logo appears during POST. (Pressing Esc in
the status causes the screen display to be
switched to the POST execution screen.
[No] Set this item to "Yes" to clear the
configuration data (system information
Yes
stored by POST). The parameter is changed
to "No" after the system is booted.
On Specify whether the numlock is enabled or
disabled on booting.
[Off]
[Boot] The boot up operation pauses at the end of
POST if a memory error or a CPU error
Halt
occurs.
Your Setting
[ ]: Factory-set