NEC Express5800 series User Manual page 220

Hide thumbs Also See for Express5800 series:
Table of Contents

Advertisement

9-22 Upgrading Your Server
53.
Secure the PCI bracket assembly with two screws.
54.
Install the CPU blade in the Blade Assembly Unit according to the User's Guide of the
Blade Assembly Unit.
55.
Power on the CPU blade. Make sure that no error messages associated with the board
appears on the POST screen.
See Chapter 8 for details of POST error messages.
Select [Advanced] → [Reset Configuration Data] on the [Advanced] menu and set [Reset
56.
Configuration Data] to [Yes].
This is required to update the hardware update information. See Chapter 4 for details.
57.
Start the BIOS configuration utility installed on the installed board to provide setup for the
board.
The existence of the utility and its start and operation procedures vary depending on the
type of the board. Refer to the documentation coming with the board for details.

Advertisement

Table of Contents
loading

Table of Contents