INSTALLING THE BLADE ASSEMBLY UNIT
Refer to the manual that comes with the Blade Assembly Unit for installation instructions for Blade
Assembly Unit into a standard 19-inch rack assembly.
Observe the following instructions to use the server safely. Failure to follow
these instructions may result in death or serious personal injury. See pages 1-2
to 1-6 for details.
Observe the following instructions to use the server safely. Failure to follow
these instructions may cause a fire, personal injury, or property damage. See
pages 1-2 to 1-6 for details.
Do not use any rack which does not conform to the relevant standard.
Disconnect the power cord(s) before installing or removing the server.
Do not leave more than one device being pulled out from the rack.
Do not lift the server by yourself.
Always install the server in the specified place.
Do not install the server on the rack leaving the cover removed.
Do not pinch your finger with mechanical components.
Setting Up Your Server 3-7
WARNING
CAUTION