Specifications - NEC Express5800 series User Manual

5-32 Installing the Operating System
4.
Specify "Complete memory dump" and modify [Dump file:] in the [Write debugging
information] group box.
e.g. Write the debug information in D drive write the file name "MEMORY.DMP".
D:\MEMORY.DMP
5.
Click [Settings] on the [Performance] group box.
The [Performance Options] window appears.
6.
Click the [Advanced] tab on the [Performance Options] window.
7.
Click [Change] on the [Virtual memory] group box.
8.
Modify [Initial Size] in the [Paging file size for selected drive] box to the value larger than
[Recommended], and click [Set].
IMPORTANT:
Be sure to create the memory dump with the size described above
on the OS partition. If [Initial Size] of the paging file is specified
to the value smaller than "Recommended" value, the correct debug
information (memory dump) will not be collected.
For more information on the "Recommended" value, see "Partition
Size to be Created" described earlier.
We recommend you test once the memory dump by pressing the
dump switch, and make sure that the dump is collected normally.
In case the memory is expanded, re-specify the paging file to suit
the new memory size.
9.
Click [OK].
The message to restart the system may appear according to the modified specification. In
such a case, follow the message to restart the system.