NEC Express5800 series User Manual page 91

Configuring Your Server 4-25
Exit
Move the cursor onto "Exit" to display the Exit menu.
The following describes each option on the Exit menu:
Exit Saving Changes
Select this item to terminate SETUP after saving the newly selected information in CMOS
(non-volatile memory).
If you select "Yes," SETUP is terminated with the newly selected information saved in CMOS
(non-volatile memory). Then the server automatically reboots the system.
Exit Discarding Changes
Select this item to terminate SETUP without saving the newly selected information in CMOS
(non-volatile memory).
Selecting "No" allows SETUP to be terminated without storage of the modified information. If you
select "Yes," SETUP is terminated with the modified information saved in CMOS. Then the server
automatically reboots the system.