NEC Express5800 series User Manual page 88

4-22 Configuring Your Server
Console Redirection
The following screen appears if you select "Console Redirection" on the Server menu and press
Enter.
See the table below for the items.
Option
BIOS Redirection
Port
ACPI Redirection
Port
Baud Rate
Flow Control
Console Type
Remote Console
Reset
Parameter
[Disabled]
Serial Port B
[Disabled]
Serial Port B
9600
[19.2k]
57.6k
115.2k
[None]
Xon/Xoff
CTS/RTS
CTS/RTS+CD
PC ANSI
[VT100+]
VT-UTF8
[Disabled]
Enabled
Description
Specify the address/interrupt of the
serial port to which a hardware
console is connected.
Specify the serial port to which an
ACPI console is connected.
Specify the baud rate used for the
interface with successive hardware
consoles.
Specify the flow control method.
Specify the type of remote console.
Specify whether reset from the remote
console is enabled or disabled.
Your Setting
[ ]: Factory-set