NEC Express5800 series User Manual page 123

7.
Press S when the following message appears:
Setup could not determine the type of one or more mass storage devices
installed in your system, or you have chosen to manually specify an adapter.
Currently, Setup will load support for the following mass storage devices.
Select [Other] and press Enter.
8.
Insert Windows 2000 OEM-DISK for NEC EXPRESSBUILDER into the floppy disk
drive and press Enter.
manufacturer-supplied hardware support disk
9.
Select the [Adaptec Ultra320 SCSI Cards (Win2000)] and press Enter.
Then, it returns to the screen of step 5.
10.
If the optional board is installed, select the proper SCSI Adapter and press Enter.
– Adaptec HostRAID U320 Driver Ver 1.02 For Windows 2000/XP/2003
(When onboard Adaptec HostRAID controller is used.)
Then continue the proper jobs depending on the messages. Refer to the "First Step Guide" for
details of the installation.
After the file copy, the system is automatically restarted. Then provide the setup depending on the
directions on the screen. Refer to the "First Step Guide" for details.
Jobs after Installation
After the installation is completed, perform the following jobs to complete the setup.
Installation of USB CD-ROM driver (Refer to the Users Guide of External CD-ROM
Drive N8460-001.)
System update
Detailed driver setting
Setup for fault processing
System information backup
Installation of terminal service (if required)
Please insert the disk labeled
into Drive A:
* Press ENTER when ready.
Installing the Operating System 5-13