Setting Up Asmbe By Deploymentmanager - NEC Express5800 series User Manual

6-12 Installing and Using Utilities

Setting up ASMBE by DeploymentManager

To install ASMBE via the DeploymentManager, perform the procedure below.
NOTE: Install DeploymentManager on the relevant system, and
perform the initial setting up.
1.
Right-click on Master Control Menu of NEC EXPRESSBUILDER, and select "Adaptec
Storage Manager - Browser Edition" on the pop-up menu.
2.
Select "Regist ASMBE module to DeploymentManager" and click [Next].
When the files are copied, click [OK].
An image of ASMBE is created in the above procedure.
NOTE: The end of the last character in "Regist ASMBE module to
DeploymentManager" in the popup window mentioned above may not
be displayed. Even so, there is no problem in the operation and
processing after selecting the option.
When you install via the DeploymentManager, please choose ASMBE from an Application tab at
the time of creation of a scenario file, and advance installation.
For more information, please refer to " DeploymentManager User's Guide (Basic Operation)" in the
NEC EXPRESSBUILDER CD-ROM.
Setting up Internet Explorer and Report Monitoring may be required. If necessary, perform these
settings referring to an appendix of "Adaptec Storage Manager - Browser Edition User's Guide" in
the NEC EXPRESSBUILDER CD-ROM.