Memory
To pause the POST if the memory error is detected
Select [Advanced] - [Memory/Processor Error] - [Halt].
To check the installed memory (DIMM board) status
Select [Advanced] - [Memory Configuration] - [DIMM Group #1 - #2 Status] and check
the status indications.
To clear the memory (DIMM board) error information
Select [Advanced] - [Memory Configuration] - [Memory Retest] - [Yes] and reboot the
system.
CPU
To pause the POST if the system detects the CPU error
Select [Advanced] - [Memory/Processor Error] - [Halt].
To check the installed CPU status
Select [Main] - [Processor Settings] and check the status indications.
The on-screen CPU numbers and socket locations on the mother board are associated as
shown in the figure below.
To clear the CPU error information
Select [Main] - [Processor Settings] - [Processor Retest] - [Yes] and reboot the server.
Keyboard
To set Numlock and key repeat
Select [Advanced] → [NumLock] → [On] and set each item.
CPU #2
CPU #1
Configuring Your Server 4-5