Call Forwarding Parameters - AudioCodes Mediant 800B User Manual

Parameter
56.10.5.3

Call Forwarding Parameters

The call forwarding parameters are described in the table below.
Parameter
Web: Enable Call
Forward
CLI: call-forward
[EnableForward]
Call Forwarding Table
Web: Call Forwarding
Table
EMS: Analog Gateway
Provisioning > Tab: Call
Forward
CLI: configure voip > gw
analoggw call-forward
[FwdInfo]
Call Forward Reminder Ring Parameters
User's Manual
From:
<sip:4505656002@192.168.13.40:5060>;tag=1455352915
To: <sip:06@192.168.13.2:5060>
Call-ID:0010-0008@192.168.13.2
CSeq:342168303 INFO
Content-Length:28
Content-Type:application/broadsoft
play tone CallWaitingTone1
Table 56-45: Call Forwarding Parameters
Enables the Call Forwarding feature.

[0] Disable

[1] Enable (Default)
For FXS interfaces, the Call Forward table (FwdInfo parameter) must be
defined to use the Call Forward service. The device uses SIP REFER
messages for call forwarding.
Notes:

To use this service, the devices at both ends must support this option.

For the device to respond to SIP 3xx responses with a new SIP
request (forwarding the original request), set this parameter to
Enable.
This table parameter configures call forwarding of IP-to-Tel calls (using
SIP 302 response) to other device ports or an IP destination, based on
the device's port to which the call was originally routed.
The format of the ini file table parameter is as follows:
[FwdInfo]
FORMAT FwdInfo_Index = FwdInfo_Type, FwdInfo_Destination,
FwdInfo_NoReplyTime, FwdInfo_Module, FwdInfo_Port;
[\FwdInfo]
Where,

Module = Module number, where 1 denotes the module in Slot 1.

Port = Port number, where 1 denotes Port 1 of a module.
For example:

Below configuration forwards calls originally destined to Port 1 of
Module 1 to "1001" upon On Busy:
FwdInfo 0 = 1,1001,30,1,1;

Below configuration forwards calls originally destined to Port 2 of
Module 1 to an IP address upon On Busy:
FwdInfo 1 = 1,2003@10.5.1.1,30,1,2;
For a detailed description of this table, see Configuring Call Forward on
page 465.
Note: The indexing of this parameter starts at 0.
860
Mediant 800B Gateway and E-SBC
Description
Description
Document #: LTRT-10286