AudioCodes Mediant 800B User Manual page 824

Parameter
Web/EMS: Input Gain
CLI: input-gain
[InputGain]
Web: Voice Volume
EMS: Volume (dB)
CLI: voice-volume
[VoiceVolume]
EMS: Payload Format
CLI: G726-voice-payload-format
[VoicePayloadFormat]
Web: MF Transport Type
CLI: MF-transport-type
[MFTransportType]
Web: Silence Suppression
EMS: Silence Compression Mode
CLI: silence-compression-mode
[EnableSilenceCompression]
Web: Echo Canceler
EMS: Echo Canceller Enable
CLI: echo-canceller-enable
[EnableEchoCanceller]
User's Manual
Table 56-35: Voice Parameters
Global parameter that defines the pulse-code modulation
(PCM) input (received) gain control level (in decibels). You
can also configure this functionality per specific calls, using
IP Profiles (IpProfile_InputGain) or Tel Profiles. For a
detailed description of this parameter and for configuring
this functionality in the IP Profile table, see ''Configuring IP
Profiles'' on page
Configuring Tel Profiles on page 301.
Note: If this functionality is configured for a specific profile,
the settings of this global parameter is ignored for calls
associated with the profile.
Global parameter that defines the voice gain control (in
decibels). This defines the level of the transmitted (IP-to-
Tel/PSTN) signal. You can also configure this functionality
per specific calls, using IP Profiles (IpProfile_VoiceVolume)
or Tel Profiles. For a detailed description of this parameter
and for configuring this functionality in the IP Profile table,
see ''Configuring IP Profiles'' on page
Profile table, see Configuring Tel Profiles on page 301.
Note: If this functionality is configured for a specific profile,
the settings of this global parameter is ignored for calls
associated with the profile.
Determines the bit ordering of the G.726/G.727 voice
payload format.

[0] = (Default) Little Endian

[1] = Big Endian
Note: To ensure high voice quality when using
G.726/G.727, both communicating ends should use the
same endianness format. Therefore, when the device
communicates with a third-party entity that uses the
G.726/G.727 voice coder and voice quality is poor, change
the settings of this parameter (between Big Endian and
Little Endian).
Currently, not supported.
Global parameter that enables the Silence Suppression
feature. You can also configure this functionality per
specific calls, using IP Profiles (IpProfile_SCE). For a
detailed description of this parameter and for configuring
this functionality in the IP Profile table, see ''Configuring IP
Profiles'' on page 304.
Note: If this functionality is configured for a specific IP
Profile, the settings of this global parameter is ignored for
calls associated with the IP Profile.
Global parameter that enables echo cancellation (i.e., echo
from voice calls is removed). You can also configure this
functionality per specific calls, using IP Profiles
(IpProfile_EnableEchoCanceller) or Tel Profiles. For a
detailed description of this parameter and for configuring
this functionality in the IP Profile table, see ''Configuring IP
824
Mediant 800B Gateway and E-SBC
Description
304 or in the Tel Profile table, see
304
Document #: LTRT-10286
or in the Tel