Services; Sip-Based Media Recording Parameters; Radius And Ldap Parameters; General Parameters - AudioCodes Mediant 800B User Manual

User's Manual

56.14 Services

56.14.1 SIP-based Media Recording Parameters

The SIP-based media recording parameters are described in the table below.
Parameter
Web: SIP Recording Application
CLI: configure voip/services sip-
recording general-
setting/enable-sip-rec
[EnableSIPRec]
Web: Recording Server (SRS)
Destination Username
CLI: configure voip/services sip-
recording general-
setting/siprec-server-dest-
username
[SIPRecServerDestUsername]
SIP Recording Routing Table
Web: SIP Recording Routing
table
CLI: configure voip/services sip-
recording sip-rec-routing
[SIPRecRouting]

56.14.2 RADIUS and LDAP Parameters

56.14.2.1

General Parameters

The general RADIUS and LDAP parameters are described in the table below.
Parameter
Web: Use Local Users
Database
CLI: configure system >
mgmt-auth > use-local-
users-db
Version 6.8
Table 56-74: SIP-based Media Recording Parameters
Enables the SIP-based Media Recording feature:

[0] Disable (default)

[1] Enable
Note: For this parameter to take effect, a device reset is required.
Defines the SIP user part for the recording server. This user part is
added in the SIP To header of the INVITE message that the device
sends to the recording server.
The valid value is a string of up to 50 characters. By default, no
user part is defined.
Defines SIP Recording Routing rules (calls to record).
The format of the ini file table parameter is as follows:
[ SIPRecRouting ]
FORMAT SIPRecRouting_Index =
SIPRecRouting_RecordedIPGroupID,
SIPRecRouting_RecordedSourcePrefix,
SIPRecRouting_RecordedDestinationPrefix,
SIPRecRouting_PeerIPGroupID,
SIPRecRouting_PeerTrunkGroupID, SIPRecRouting_Caller,
SIPRecRouting_SRSIPGroupID;
[ \SIPRecRouting ]
For a detailed description of this table, see ''Configuring SIP
Recording Routing Rules'' on page 196.
General RADIUS and LDAP Parameters
Defines when the device uses its local user database (Web Users
table) for LDAP- or RADIUS-based management-user login
authentication.

[0] When No Auth Server Defined = (Default) When no
LDAP/RADIUS server is configured (or as fallback if the server is
56. Configuration Parameters Reference
Description
Description
983 Mediant 800B Gateway and E-SBC