Assigning A Port Name; Configuring Web User Accounts - AudioCodes Mediant 800B User Manual

6.2.1

Assigning a Port Name

You can configure an arbitrary name or a brief description for each telephony port
displayed on the Home page. This description is displayed as a tooltip when you hover
your mouse over the port.
Note: Only alphanumerical characters can be used in the port description.

To add a port description:
1. Open the Home page.
2. Click the required port icon; a shortcut menu appears:
3. From the shortcut menu, choose Update Port Info; a text box appears:
4. Type a brief description for the port, and then click Apply Port Info.
6.3

Configuring Web User Accounts

Web user accounts define users for the Web interface and CLI. User accounts permit login
access to these interfaces as well as different levels of read and write privileges. Thus,
user accounts prevent unauthorized access to these interfaces, permitting access only to
users with correct credentials (i.e., username and password).
Each user account is based on the following:

Username and password: Credentials that enable authorized login access to the
Web interface.

User level (user type): Access privileges specifying what the user can view in the
Web interface and its read/write privileges. The table below describes the different
types of Web user account access levels:
User Level Representation in
Security
Administrator
Master
User's Manual
Figure 6-16: Choosing Port Settings
Table 6-8: Web User Access Levels and Privileges
Numeric
RADIUS
200 Read / write privileges for all pages. It can create all user
types and is the only one that can create the first Master
user.
Note: At least one Security Administrator user must exits.
220 Read / write privileges for all pages. Can create all user
types, including additional Master users and Security
Administrators. It can delete all users except the last
Mediant 800B Gateway and E-SBC
Privileges
56 Document #: LTRT-10286