Configuring Ldap Search Methods - AudioCodes Mediant 800B User Manual

User's Manual
CN=\#AllCellular,OU=Groups,OU=APC,OU=Japan,OU=ABC,DC=corp,DC=abc,D
C=com
The device searches this LDAP response for the group names that you configured in the
Management LDAP Groups table in order to determine the user's access level. If the
device finds a group name, the user is assigned the corresponding access level and login
is permitted; otherwise, login is denied. Once the LDAP response has been received
(success or failure), the LDAP session terminates.
The following procedure describes how to configure an access level per management
groups in the Web interface. You can also configure this using the table ini file parameter,
MgmntLDAPGroups or CLI command, configure voip > ldap > mgmt-ldap-groups.

To configure management groups and corresponding access level:
1. Open the LDAP Configuration Table page (Configuration tab > VoIP menu >
Services > LDAP > LDAP Configuration Table).
2. In the LDAP Configuration table, select the row of the LDAP server for which you want
to configure management groups with a corresponding access level, and then click the
Management LDAP Groups Table link (located at the bottom of the page); the
Management LDAP Groups Table page opens.
3. Click Add; the following dialog box appears:
Figure 15-14: Management LDAP Groups Table - Add Record
4. Configure a group name(s) with a corresponding access level according to the
parameters described in the table below.
5. Click Submit, and then save ("burn") your settings to flash memory.
Management LDAP Groups Table Parameter Descriptions
Parameter
Index
[MgmntLDAPGroups_
GroupIndex]
Level
[MgmntLDAPGroups_L
evel]
Groups
[MgmntLDAPGroups_
Group]

15.4.7 Configuring LDAP Search Methods

You can configure the device's method for searching the LDAP server(s) for the configured
DN objects:

DN Search Method between Two LDAP Servers: When two LDAP servers are
implemented, the device runs an LDAP query to search for DN object records on both
Version 6.8
Defines an index number for the new table record.
Note: Each table row must be configured with a unique index.
Defines the access level of the group(s).

[0] Monitor (Default)

[1] Security Administrator

[2] Administrator
Defines the attribute names of the groups in the LDAP server.
The valid value is a string of up to 256 characters. To define multiple
groups, separate each group name with a semicolon (;).
211
Description
Mediant 800B Gateway and E-SBC
15. Services