Trunk Group; Configuring Trunk Group Table - AudioCodes Mediant 800B User Manual

Analog & digital voip media gateway
Hide thumbs Also See for Mediant 800B:
Table of Contents

Advertisement

User's Manual
22

Trunk Group

This section describes the configuration of the device's channels, which includes assigning
them to Trunk Groups.
22.1

Configuring Trunk Group Table

The Trunk Group table lets you configure up to 120 Trunk Groups. A Trunk Group is a
logical group of physical trunks and channels. A Trunk Group can include multiple trunks
and ranges of channels. To enable and activate the channels of the device, Trunk Groups
need to be configured and assigned with telephone numbers. Channels that are not
configured in this table are disabled.
Once you have configured your Trunk Groups, you need to use them for routing incoming
IP calls to the Tel side, which is represented by a specific Trunk Group (ID). For configuring
IP-to-Tel routing rules, see ''Configuring Inbound IP Routing Table'' on page 392. You can
also use Trunk Groups for routing Tel calls to the IP side. For configuring Tel-to-IP routing
rules, see ''Configuring Outbound IP Routing Table'' on page 383.
The following procedure describes how to configure Trunk Groups in the Web interface.
You can also configure this using the table ini file parameter, TrunkGroup_x or CLI
command, configure voip > gw hunt-or-trunk-group trunk-group.
To configure a Trunk Group:
1.
Open the Trunk Group Table page (Configuration tab > VoIP menu > GW and IP to
IP > Trunk Group > Trunk Group).
2.
Configure a Trunk Group according to the parameters described in the table below.
3.
Click Submit, and then save ("burn") your settings to flash memory.
You can also register all your Trunk Groups. The registration method per Trunk Group is
configured by the 'Registration Mode' parameter in the Trunk Group Settings page (see
''Configuring Hunt Group Settings'' on page 353).
To register the Trunk Groups, click the Register button, located below the Trunk
Group table.
To unregister the Trunk Groups, click the Unregister button, located below the Trunk
Group table.
Version 6.8
351
Mediant 800B Gateway and E-SBC
22. Trunk Group

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents